Feature
Efficient energy management with endless possibilities
This is what makes room control so special
Open window detection
Open windows are recognised and the heating or cooling output is automatically reduced.
Standard desired temperature
The temperature can be reset to the standard value at a specific time every day.
Mode settings
General settings are defined for all devices for self-defined time periods, e.g. summer and winter mode.
Rule-based control options
Temperature upper limits
The temperature cannot exceed a defined value. If a change is made to a temperature above the limit, it is automatically reset.
Lower temperature limits
The temperature cannot fall below a defined value. If there is a change to a temperature below the limit, it is automatically reset.
Daily reduction with optional offset
The temperature is lowered to a specific value within a defined period during the day or changed using an offset.
Night setback with optional offset
The temperature is lowered at night and raised again in the morning. This is done either by means of predefined temperatures or with a defined offset.
Occupancy-dependent heating and cooling
Occupancy schedule
Depending on the room occupancy, occupied rooms are heated or cooled accordingly, while vacant rooms are kept at an efficient temperature level.
Early check-in/check-out
The temperature is raised/lowered early after check-in or lowered early before check-out.
Real-time check-in/check-out
The actual arrival/departure is used for intelligent heating/cooling during check-in/check-out.
Unsafe pre-heating
The room is preheated for possible occupancy.
Overview, statistics & notifications
Overview
You always have an overview of your rooms and important information such as the active control sets and current temperature.
Dashboard
A clear dashboard gives you a direct overview of the most important information such as devices, battery status and activities..
Statistics
For each room you will find a diagram that shows the activities in a certain period of time.
Warnings
Receive direct e-mail notifications for certain events, for example when a device is offline or the battery status is low.
Device details & settings
Dashboard
You have a clear dashboard where you can view all your devices and their current status. Here you will also find further information on the installed devices.
Calibration run
The calibration run or maintenance run ensures functional thermostats and helps you to rectify faults by recalibrating the valve on the radiator.
Device details
You can view details for each device to help you solve problems. Here you can see, for example, the status over time, the last message or the valve position.
Error messages
If there are error messages from your installed devices, these are displayed in a clear and easy-to-understand table.
There are many ways to increase energy efficiency
We will find out together in an individual consultation which is best suited to your use case.